October 2005

PAYLINK's iLink Terminal

PAYLINK's iLink Terminal was designed as a cost effective base for networked time and attendance applications. The size of a power point, the iLink clearly displays the time, and provides a touch socket for reading high security iTag to identify staff.
Up to 31 units may be daisy chained on up to 1.2 klm of low cost cable from a single PC COM Port via PAYLINK's Intelligent RS485 Converter.
In operation the iLink Terminal signals a "good read" of an iTag audibly and visually. Data is then stored, time stamped, in non volatile memory, awaiting collection by the host computer at its convenience. When polled the iLink Terminal downloads its data, and synchronises its clock to that of its host.
The iLink Terminal is built tough. Its attractive appearance conceals thick ABS plastic walls, with back and side reinforcement in stainless steel. Australian power point mounting brackets and blocks can be used for custom installations.
Units may be powered by a local plug pack (wall transformer) power supply, either low voltage AC or DC, or by power reticulated via extra lines in the data cable..

AUD $650.00 inc. GST

iTag

The robust and personal the iBiutton is an unobtrusive way of having your employees attendance times both in and out recorded when used with the PAYLINK iLink Terminal .

AUD $10.50 each inc. GST

iTag Reader

The iTag reader automates accurate reading of iTags into the system or easily matches your iTag with an employee. (USB Adapter Required)

AUD $38.50 inc. GST

USB Adapter for iTag Reader

The USB adapter connects the iTag reader to your Personal Computer.

AUD $85.00 inc. GST

Intelligent RS-485 Convertor
(for a hardwired System)

Each installation of PAYLINK's iLink Terminals at a site requires an Intelligent RS-485 Adaptor to interface between the terminals and a PC or modem. Up to 31 PAYLINK's iLink Terminals can be daisy-chained together, using up to 1200 metres of low-cost twisted pair cable.
The Intelligent RS-485 convertor comes with a DB9 RS-232 cable and a 500mA 12v DC power supply
(Some installation may be required)

AUD $320.00 inc. GST

Direct Download Kit

The Direct download kit allows you to record your employees times without the need to have the timeclock wired into your your computer. This enables you to gather your iLink Terminal information from remote or temporary locations. In each kit you get a Time Tag, Data Tag, Software and Data Tag Homebase.

AUD $210.00 inc. GST

Paytime Base Software

You've probably been accumulating and then calculating the times for your payroll in the same time-consuming and error-prone way for years. But there is a better way, one that will take less time and involve less stress. This way your staff clock in and out by using the PAYLINK's iTag placed into the PAYLINK's iLink Terminal. Their clocking times are stored and directly processed by your computer, saving all the manual work of other methods. Paylink Paytime collects data from PAYLINK's iLink Terminal's, applying the shift and time adjustment rules you've set for your workplace. The resulting time sheet summaries can be linked to your payroll program, using optional Export Modules (see below).
For Windows 95/98/NT/2000/ME.

AUD $1,200.00 inc. GST

Cat5 Cable
(5m,10m and 20m lengths)

For connection from Intelligent converter to Paylink iLink Terminal

from AUD $32.00 inc. GST